Datasheet

DP83630
www.ti.com SNLS335B –OCTOBER 2010–REVISED APRIL 2013
Table 9-1. 25 MHz Oscillator Specification
Parameter Min Typ Max Units Condition
Frequency 25 MHz
Frequency Tolerance ±50 ppm Operational Temperature
Frequency Stability ±50 ppm 1 year aging
Rise / Fall Time 6 nsec 20% - 80%
Jitter 800
(1)
psec Short term
Jitter 800
(1)
psec Long term
Symmetry 40% 60% Duty Cycle
(1) This limit is provided as a guideline for component selection and not ensured by production testing. Refer to SNLA091, “PHYTER 100
Base-TX Reference Clock Jitter Tolerance,” for details on jitter performance.
Table 9-2. 50 MHz Oscillator Specification
Parameter Min Typ Max Units Condition
Frequency 50 MHz
Frequency Tolerance ±50 ppm Operational Temperature
Frequency Stability ±50 ppm Operational Temperature
Rise / Fall Time 6 nsec 20% - 80%
Jitter 800
(1)
psec Short term
Jitter 800
(1)
psec Long term
Symmetry 40% 60% Duty Cycle
(1) This limit is provided as a guideline for component selection and not ensured by production testing. Refer to SNLA091, “PHYTER 100
Base-TX Reference Clock Jitter Tolerance,” for details on jitter performance.
Table 9-3. 25 MHz Crystal Specification
Parameter Min Typ Max Units Condition
Frequency 25 MHz
Frequency Tolerance ±50 ppm Operational Temperature
Frequency Stability ±50 ppm 1 year aging
Shunt Capacitance 25 40 pF Range of C
L1
and C
L2
Copyright © 2010–2013, Texas Instruments Incorporated Design Guidelines 71
Submit Documentation Feedback
Product Folder Links: DP83630