Datasheet

DP83620

SNLS339C –JANUARY 2011–REVISED APRIL 2013

www.ti.com

10.4.4 TDR Window Register (TDR_WIN), Page 2

This register contains sample window control for the Time Domain Reflectometry (TDR) cable diagnostics.

The two values contained in this register specify the beginning and end times for the window to monitor

the response to the transmitted pulse. Time values are in 8 ns increments. This provides a method to

search for multiple responses and also to screen out the initial outgoing pulse.

Table 10-31. TDR Window Register (TDR_WIN), address 0x17

Bit Bit Name Default Description

15:8 TDR_START 0000 0000, RW TDR Start Window:

Specifies start time for monitoring TDR response.

7:0 TDR_STOP 0000 0000, RW TDR Stop Window:

Specifies stop time for monitoring TDR response. The Stop Window

should be set to a value greater than or equal to the Start Window.

10.4.5 TDR Peak Register (TDR_PEAK), Page 2

This register contains the results of the TDR Peak Detection. Results are valid if the TDR_CTRL[11] is

clear following sending the TDR pulse.

Table 10-32. TDR Peak Register (TDR_PEAK), address 0x18

Bit Bit Name Default Description

15:14 RESERVED 00, RO RESERVED: Writes ignored, read as 0.

13:8 TDR_PEAK 00 0000, RO TDR Peak Value:

This register contains the peak value measured during the TDR sample

window. If Min Mode control (TDR_CTRL[7]) is 0, this contains the

maximum detected value. If Min Mode control is 1, this contains the

minimum detected value.

7:0 TDR_PEAK_TIME 0000 0000, RO TDR Peak Time:

Specifies the time for the first occurrence of the peak value.

10.4.6 TDR Threshold Register (TDR_THR), Page 2

This register contains the results of the TDR Threshold Detection. Results are valid if the TDR_CTRL[11]

is clear following sending the TDR pulse.

Table 10-33. TDR Threshold Register (TDR_THR), address 0x19

Bit Bit Name Default Description

15:9 RESERVED 0000 000, RO RESERVED: Writes ignored, read as 0.

8 TDR_THR_MET 0, RO TDR Threshold Met:

This bit indicates the TDR threshold was met during the sample window. A

value of 0 indicates the threshold was not met.

7:0 TDR_THR_TIME 0000 0000, RO TDR Threshold Time:

Specifies the time for the first data that met the TDR threshold. This field is

only valid if the threshold was met.

Submit Documentation Feedback

Product Folder Links: DP83620