Datasheet

Preface

DLPU006C–January 2012–Revised December 2013

Read This First

About This Guide

The DLP

LightCrafter™ is a third party implementation of a next generation DLP 0.3-inch WVGA chipset

reference design to enable faster development cycles for applications requiring small form factor and

intelligent pattern display.

This guide is an introductory document for the DLP LightCrafter that provides an overview of the system

and its software. Other documents provide more in-depth information of the hardware and software

features of the components of the DLP LightCrafter.

Figure 1. DLP LightCrafter Evaluation Module

Related Documentation from Texas Instruments

• DLPC300 data sheet: DLP Digital Controller for DLP3000 DMD, TI literature number DLPS023

• DLP3000 data sheet: DLP 0.3 WVGA DDR Series 220 DMD, TI literature number DLPS022

• DLPC300 Software Programmer’s Guide, TI literature number DLPU004

• DLP

LightCrafter™ DM365 Command Interface Guide, TI literature number DLPU007

• DLP

LightCrafter™ FPGA Overview TI literature number DLPA042

• Using the DLP

LightCrafter™ to Trigger CCD Cameras from The Image Source® TI literature number

DLPA032

• Creating Multiple Bit Depth and Multiple Color Pattern Sequences for DLP

LightCrafter™ Kit TI

literature number DLPA035

If You Need Assistance

Refer to the DLP and MEMS TI E2E Community support forums.

LightCrafter is a trademark of Texas Instruments.

DLP is a registered trademark of Texas Instruments.

DLPU006C–January 2012–Revised December 2013 Read This First

Submit Documentation Feedback