Datasheet

UART www.ti.com
Table 5-2. Camera Connector Pins (continued)
DESCRIPTION PIN SUPPLY RANGE
Ground 17 0 V
I
2
C SDA 18 2.8 V (CAM_IO)
I
2
C SCL 19 2.8 V (CAM_IO)
Camera Reset 20 2.8 V (CAM_IO)
Camera StandBy 21 2.8 V (CAM_IO)
Camera SubAddr 22 2.8 V (CAM_IO)
Camera Data[0] 23 2.8 V (CAM_IO)
Camera Data[1] 24 2.8 V (CAM_IO)
No Connect 25
Camera Trigger 26 2.8 V (CAM_IO)
Camera DataEn 27 2.8 V (CAM_IO)
No Connect 28
5.3 UART
The UART connector pins are shown in Table 5-3.
Table 5-3. UART Connector Pins
DESCRIPTION PIN SUPPLY RANGE
Ground 1 0 V
RX 2 3.3 V
TX 3 3.3 V
5.4 I
2
C
The I
2
C connector pins are shown in Table 5-4. Two matching four pin mating connector part numbers
are:
• Molex part number: 51021-0400
• Digi-Key part number: WM1722-ND
The corresponding crimps part numbers are:
• Molex part number: 50079-8000
• Digi-Key part number: WM1142CT-ND
Table 5-4. I
2
C Connector Pins
DESCRIPTION PIN SUPPLY RANGE
I
2
C SDA 1 3.3 V
I
2
C SCL 2 3.3 V
Ground 3 0 V
3.3 V Supply 4 3.3 V
5.5 Fan
The fan connector pins are shown in Table 5-5. Two matching connector part numbers are:
• Molex part number: 51021-0200
• Digi-Key part number: WM1720-ND
The corresponding crimps part numbers are:
60
Connectors DLPU006C–January 2012–Revised December 2013
Submit Documentation Feedback
Copyright © 2012–2013, Texas Instruments Incorporated