Datasheet

Upgrading Firmware

www.ti.com

Figure 2-60. Windows 7 Run cmd.exe Right-click Menu

6. Change to the directory with the DM365 firmware (*.dat) and lcr_boot_sd.exe using the "cd" command.

See Figure 2-61.

7. In the "Windows Command Processor" run lcr_boot_sd.exe {DM365 firmware file} E: for a SD card

mapped to the E: drive.

• To create a bootable SD card, use the dm3xx_sdv*.dat firmware

• To create a SD card to flash the DLP LightCrafter NAND, use the dm3xx_nandv*.dat firmware

Operating the DLP LightCrafter DLPU006C–January 2012–Revised December 2013

Submit Documentation Feedback