Datasheet

www.ti.com

Upgrading Firmware

Figure 2-55. DLP LightCrafter GUI Firmware Upgrade Tab

2. Select which firmware to upgrade and then click the “Browse” button as shown in Figure 2-56.

• To upgrade MSP430 firmware, select a TI-tagged file (*.txt).

• To upgrade FPGA, select an “*.rbf” file.

• To upgrade DLPC300 firmware, select a binary file (*.bin).

• To upgrade EDID, select a binary file (*.bin).

– Read Section 2.7 for setting the video mode parameters.

Figure 2-56. DLP LightCrafter GUI Firmware Select Drop-Down Options

3. After the file is selected, click Install as shown in Figure 2-57 .

Figure 2-57. DLP LightCrafter GUI Firmware Install Button

DLPU006C–January 2012–Revised December 2013 Operating the DLP LightCrafter

Submit Documentation Feedback