Datasheet

www.ti.com Creating Pattern Sequences
Figure 2-35. DLP LightCrafter GUI RGB Video Streaming Set Button
8. To retrieve the EVM's current video mode settings, click the "Get" button.
2.8 Creating Pattern Sequences
The DLP LightCrafter can perform external and internal pattern sequences. External sequences use
streaming patterns from the mini-HDMI port. Internal sequences use preloaded patterns and can be stored
on the LightCrafter with solutions for reuse. The following sections describe how to setup pattern
sequences on DLP LightCrafter.
2.8.1 Internal Stored Pattern Sequences
To create an internal pattern sequence follow these steps:
1. Set the display mode as "Stored Pattern Sequence".
2. Select the "Stored Pattern Sequence", then the "Sequence Settings" tab as shown in Figure 2-36.
35
DLPU006C–January 2012–Revised December 2013 Operating the DLP LightCrafter
Submit Documentation Feedback
Copyright © 2012–2013, Texas Instruments Incorporated