Datasheet

www.ti.com Connecting to a PC
Figure 2-18. Windows 7 Local Area Connection TCP/IPv4 Properties
12. Click "OK" to exit the IPv4 Properties
13. Click "OK" to exit the LAN connection properties.
2.2.5 Changing the DLP LightCrafter's IP Address
To change DLP LightCrafter's IP address, follow these steps:
1. Connect DLP LightCrafter GUI to EVM.
2. Select the "Connections" tab. See Figure 2-19.
Figure 2-19. DLP LightCrafter GUI Connection Tab
3. Change the last three digits of the IP address in the "New IP Address" textbox. See Figure 2-20.
• For example: Change "192.168.1.100" to "192.168.1.106"
• Even IP addresses are recommended to prevent IP Address conflicts between the computer's
27
DLPU006C–January 2012–Revised December 2013 Operating the DLP LightCrafter
Submit Documentation Feedback
Copyright © 2012–2013, Texas Instruments Incorporated