Datasheet

Connecting to a PC www.ti.com
Figure 2-15. Windows 7 Network Connections Identifying Local Area Connection
6. Open a cmd terminal and run "ipconfig /all"
7. A list of all connections will be displayed. Find the IPv4 address and Subnet Mask of DLP
LightCrafter's Local Area Connection. See Figure 2-16.
Figure 2-16. Windows 7 Command Window Local Area Connection IPv4 Address
8. From the Network Connections window, right click on DLP LightCrafter's Local Area Connection and
click "Properties"
9. In the box "This connection uses the following items" under the Networking tab, look for “Internet
Protocol Version 4”. Highlight the item by clicking on it and then click “Properties” underneath the box.
See Figure 2-17.
Figure 2-17. Windows 7 Local Area Connection Properties
10. Choose "Use the following IP address"
11. Enter the IPv4 address and Subnet Mask found from step 7. See Figure 2-18.
• Please note that each connected device and USB port requires a unique IP address for its Local
Area Connection.
26
Operating the DLP LightCrafter DLPU006C–January 2012–Revised December 2013
Submit Documentation Feedback
Copyright © 2012–2013, Texas Instruments Incorporated