Datasheet

Register 109: LCD Controller Run Mode Clock Gating Control (RCGCLCD),
offset 0x690
The RCGCLCD register provides software the capability to enable and disable the LCD Controller
module in Run mode. When enabled, a module is provided a clock and accesses to module registers
are allowed. When disabled, the clock is disabled to save power and accesses to module registers
generate a bus fault.
Important: This register should be used to control the clocking for the LCD Controller module.
LCD Controller Run Mode Clock Gating Control (RCGCLCD)
Base 0x400F.E000
Offset 0x690
Type RW, reset 0x0000.0000
16171819202122232425262728293031
reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
0123456789101112131415
R0reserved
RWROROROROROROROROROROROROROROROType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved31:1
LCD Controller Module 0 Run Mode Clock Gating Control
DescriptionValue
LCD Controller module 0 is disabled.0
Enable and provide a clock to LCD Controller module 0 in Run
mode.
1
0RWR00
December 13, 2013418
Texas Instruments-Advance Information
System Control