Datasheet

Register 104: Analog Comparator Run Mode Clock Gating Control
(RCGCACMP), offset 0x63C
The RCGCACMP register provides software the capability to enable and disable the analog
comparator module in Run mode. When enabled, the module is provided a clock and accesses to
module registers are allowed. When disabled, the clock is disabled to save power and accesses to
module registers generate a bus fault.
Important: This register should be used to control the clocking for the analog comparator module.
Analog Comparator Run Mode Clock Gating Control (RCGCACMP)
Base 0x400F.E000
Offset 0x63C
Type RW, reset 0x0000.0000
16171819202122232425262728293031
reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
0123456789101112131415
R0reserved
RWROROROROROROROROROROROROROROROType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved31:1
Analog Comparator Module 0 Run Mode Clock Gating Control
DescriptionValue
Analog comparator module is disabled.0
Enable and provide a clock to the analog comparator module
in Run mode.
1
0RWR00
413December 13, 2013
Texas Instruments-Advance Information
Tiva
™
TM4C129XNCZAD Microcontroller