Datasheet

Register 89: 1-Wire Software Reset (SROWIRE), offset 0x598
The SROWIRE register provides software the capability to reset the available 1-Wire Module.
A peripheral is reset by software using a simple two-step process:
1. Software sets a bit (or bits) in the SROWIRE register. While the SROWIRE bit is 1, the peripheral
is held in reset.
2. Software completes the reset process by clearing the SROWIRE bit.
There may be latency from the clearing of the SROWIRE bit to when the peripheral is ready for use.
Software should check the corresponding PROWIRE bit to verify that the 1-Wire Module registers
are ready to be accessed.
Important: This register should be used to reset the 1-Wire controller modules.
1-Wire Software Reset (SROWIRE)
Base 0x400F.E000
Offset 0x598
Type RW, reset 0x0000.0000
16171819202122232425262728293031
reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
0123456789101112131415
R0reserved
RWROROROROROROROROROROROROROROROType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved31:1
1-Wire Module Software Reset
DescriptionValue
1-Wire module is not reset.0
1-Wire module is reset.1
0RWR00
393December 13, 2013
Texas Instruments-Advance Information
Tiva
™
TM4C129XNCZAD Microcontroller