Datasheet

Table 31-4. Signals by Function, Except for GPIO (continued)
DescriptionBuffer TypePin TypePin NumberPin NameFunction
Positive supply for most of the logic function,
including the processor core and most peripherals.
The voltage on this pin is 1.2 V and is supplied by
the on-chip LDO. The VDDC pins should only be
connected to each other and an external capacitor
as specified in Table 32-15 on page 2114 .
QEI module 0 index.TTLIJ18
U10
IDX0
QEI
QEI module 0 phase A.TTLIH19
V9
PhA0
QEI module 0 phase B.TTLIG18
T13
PhB0
December 13, 20132082
Texas Instruments-Advance Information
Signal Tables