Datasheet

Table 31-3. Signals by Signal Name (continued)
DescriptionBuffer TypePin TypePin Mux / Pin
Assignment
Pin NumberPin Name
GND for the Hibernation oscillator. When using a
crystal clock source, this pin should be connected
to digital ground along with the crystal load
capacitors. When using an external oscillator, this
pin should be connected to digital ground.
Power-fixedR18GNDX
GND for the MOSC. When using a crystal clock
source, this pin should be connected to digital
ground along with the crystal load capacitors. When
using an external oscillator, this pin should be
connected to digital ground.
Power-fixedD18GNDX2
An output that indicates the processor is in
Hibernate mode.
TTLOfixedM17HIB
I
2
C module 0 clock. Note that this signal has an
active pull-up. The corresponding port pin should
not be configured as open drain.
ODI/OPB2 (2)A17I2C0SCL
I
2
C module 0 data.ODI/OPB3 (2)B17I2C0SDA
I
2
C module 1 clock. Note that this signal has an
active pull-up. The corresponding port pin should
not be configured as open drain.
ODI/OPG0 (2)
PR0 (2)
N15
N5
I2C1SCL
I
2
C module 1 data.ODI/OPG1 (2)
PR1 (2)
T14
N4
I2C1SDA
I
2
C module 2 clock. Note that this signal has an
active pull-up. The corresponding port pin should
not be configured as open drain.
ODI/OPG2 (2)
PL1 (2)
PN5 (3)
PP5 (2)
PR2 (2)
V11
H19
B9
B12
N2
I2C2SCL
I
2
C module 2 data.ODI/OPG3 (2)
PL0 (2)
PN4 (3)
PP6 (2)
PR3 (2)
M16
G16
A10
B8
V8
I2C2SDA
I
2
C module 3 clock. Note that this signal has an
active pull-up. The corresponding port pin should
not be configured as open drain.
ODI/OPG4 (2)
PK4 (2)
PR4 (2)
K17
U19
P3
I2C3SCL
I
2
C module 3 data.ODI/OPG5 (2)
PK5 (2)
PR5 (2)
K15
V17
P2
I2C3SDA
I
2
C module 4 clock. Note that this signal has an
active pull-up. The corresponding port pin should
not be configured as open drain.
ODI/OPG6 (2)
PK6 (2)
PR6 (2)
V12
V16
W9
I2C4SCL
I
2
C module 4 data.ODI/OPG7 (2)
PK7 (2)
PR7 (2)
U14
W16
R10
I2C4SDA
I
2
C module 5 clock. Note that this signal has an
active pull-up. The corresponding port pin should
not be configured as open drain.
ODI/OPB0 (2)
PB4 (2)
A16
C6
I2C5SCL
I
2
C module 5 data.ODI/OPB1 (2)
PB5 (2)
B16
B6
I2C5SDA
I
2
C module 6 clock. Note that this signal has an
active pull-up. The corresponding port pin should
not be configured as open drain.
ODI/OPA6 (2)
PB6 (2)
V5
F2
I2C6SCL
December 13, 20132058
Texas Instruments-Advance Information
Signal Tables