Datasheet

■ MII: Address of the PHY register to be written. In this case, it should be the address of the
EPHYREGCTL register, 0xD.
■ CR: Clock Reference for the MDIO interface.
■ MIIW: Write Initiation. This bit is set to 1 to indicate that a write operation is to be executed.
■ MIIB: MII Busy. This bit is set to 1 to indicate that the MII is now busy with a write operation.
The EMAC clears this bit when the write has been transmitted.
4. Check the MIIB bit in the EMACMIIADDR register to identify if the MII interface is busy. When
the MIIB bit is 0, the MII interface is available to write to the PHY registers.
5. The EMACMIIDATA register should be written with the address of the extended register to be
accessed. This value is written to the EPHYADDAR register.
6. Initiate write by writing the EMACMIIADDR register fields:
■ PLA: Physical Layer Address of the PHY. The integrated PHY's address is 0x0. The values
0x1 to 0x1F are available for external PHYs.
■ MII: Address of the PHY register to be written. In this case, it should be the address of the
EPHYADDAR register, 0xE.
■ CR: Clock Reference for the MDIO interface.
■ MIIW: Write Initiation. This bit is set to 1 to indicate that a write operation is to be executed.
■ MIIB: MII Busy. This bit is set to 1 to indicate that the MII is now busy with a write operation.
The EMAC clears this bit when the write has been transmitted.
7. Check the MIIB bit in the EMACMIIADDR register to identify if the MII interface is busy. When
the MIIB bit is 0, the MII interface is available to write to the PHY registers.
8. The EMACMIIDATA register should be written with the value to be passed into the
EPHYREGCTL register. The DEVAD field of the EPHYREGCTL register identifies the device
address, which is 0x1F, for the integrated PHY. The FUNC field of the EPHYREGCTL register
should be set to 0x1 to indicate a write to an extended register address with no increment.
9. Initiate write by writing the EMACMIIADDR register fields:
■ PLA: Physical Layer Address of the PHY. The integrated PHY's address is 0x0. The values
0x1 to 0x1F are available for external PHYs.
■ MII: Address of the PHY register to be written. In this case, it should be the address of the
EPHYADDAR register, 0xD.
■ CR: Clock Reference for the MDIO interface.
■ MIIW: Write Initiation. This bit is set to 1 to indicate that a write operation is to be executed.
■ MIIB: MII Busy. This bit is set to 1 to indicate that the MII is now busy with a write operation.
The EMAC clears this bit when the write has been transmitted.
1653December 13, 2013
Texas Instruments-Advance Information
Tiva
™
TM4C129XNCZAD Microcontroller