Datasheet

DescriptionResetTypeNameBit/Field
QSSI Synchronous Serial Port Enable
DescriptionValue
QSSI operation is disabled.0
QSSI operation is enabled.1
Note: The HSCLKEN bit in the SSICR1 register should be
set only after applying reset to the QSSI module and
enabling the QSSI by setting the SSE bit, and before
any SSI data transfer. All other bits in the SSICR1
register and all bits in SSICR0 register can only be
programmed when the SSE is clear.
0RWSSE1
QSSI Loopback Mode
DescriptionValue
Normal serial port operation enabled.0
Output of the transmit serial shift register is connected internally
to the input of the receive serial shift register.
1
0RWLBM0
1397December 13, 2013
Texas Instruments-Advance Information
Tiva
™
TM4C129XNCZAD Microcontroller