Datasheet

Table 16-1. Available CCP Pins (continued)
Odd CCP PinEven CCP PinUp/Down CounterTimer
-T3CCP0Timer A
16/32-Bit Timer 3
T3CCP1-Timer B
-T4CCP0Timer A
16/32-Bit Timer 4
T4CCP1-Timer B
-T5CCP0Timer A
16/32-Bit Timer 5
T5CCP1-Timer B
-T6CCP0Timer A
16/32-Bit Timer 6
T6CCP1-Timer B
-T7CCP0Timer A
16/32-Bit Timer 7
T7CCP1-Timer B
16.2 Signal Description
The following table lists the external signals of the GP Timer module and describes the function of
each. The GP Timer signals are alternate functions for some GPIO signals and default to be GPIO
signals at reset. The column in the table below titled "Pin Mux/Pin Assignment" lists the possible
GPIO pin placements for these GP Timer signals. The AFSEL bit in the GPIO Alternate Function
Select (GPIOAFSEL) register (page 801) should be set to choose the GP Timer function. The number
in parentheses is the encoding that must be programmed into the PMCn field in the GPIO Port
Control (GPIOPCTL) register (page 818) to assign the GP Timer signal to the specified GPIO port
pin. For more information on configuring GPIOs, see “General-Purpose Input/Outputs
(GPIOs)” on page 771.
Table 16-2. General-Purpose Timers Signals (212BGA)
DescriptionBuffer TypePin TypePin Mux / Pin
Assignment
Pin NumberPin Name
16/32-Bit Timer 0 Capture/Compare/PWM 0.TTLI/OPA0 (3)
PD0 (3)
PL4 (3)
PR4 (3)
V3
C2
H18
P3
T0CCP0
16/32-Bit Timer 0 Capture/Compare/PWM 1.TTLI/OPA1 (3)
PD1 (3)
PL5 (3)
PR5 (3)
W3
C1
G19
P2
T0CCP1
16/32-Bit Timer 1 Capture/Compare/PWM 0.TTLI/OPA2 (3)
PD2 (3)
PL6 (3)
PR6 (3)
T6
D2
C18
W9
T1CCP0
16/32-Bit Timer 1 Capture/Compare/PWM 1.TTLI/OPA3 (3)
PD3 (3)
PL7 (3)
PR7 (3)
U5
D1
B18
R10
T1CCP1
16/32-Bit Timer 2 Capture/Compare/PWM 0.TTLI/OPA4 (3)
PM0 (3)
PS0 (3)
V4
K18
D12
T2CCP0
16/32-Bit Timer 2 Capture/Compare/PWM 1.TTLI/OPA5 (3)
PM1 (3)
PS1 (3)
W4
K19
D13
T2CCP1
December 13, 20131104
Texas Instruments-Advance Information
General-Purpose Timers