Datasheet

www.ti.com

Kit Contents

1.1 Kit Contents

The DK-TM4C123G Development Kit comes with the following:

• DK-TM4C123G development board

• On board In-Circuit Debug Interface (ICDI)

• Cables:

– Two USB Micro-B plug to USB-A plug cables (one for debug)

– USB Micro-A plug to USB-A receptacle cable

• 3-V CR2032 lithium coin-cell battery

• USB Flash drive containing:

– Complete documentation

– TivaWare™ for C Series Peripheral Driver Library and example source code

– A supported evaluation version of all of the following:

• Texas Instruments’ Code Composer Studio™ IDE

• Keil™ RealView® Microcontroller Development Kit (MDK-ARM)

• IAR Embedded Workbench® development tools

• Sourcery CodeBench™ development tools (time limited)

• GCC

1.2 Using the DK-TM4C123G

The recommended steps for using the DK-TM4C123G development kit are:

1. Follow the README First document included in the kit. The README First document will help get

the DK-TM4C123G development board up and running in minutes.

2. Use your preferred ARM tool-chain and the Tiva Peripheral Driver Library to develop an

application. Software applications are loaded using the on-board In-Circuit Debug Interface (ICDI).

See Chapter 3, Software Development, for the programming procedure. The TivaWare Peripheral

Driver Library User's Guide contains specific information on software structure and function.

3. Customize and integrate the hardware to suit an end application. This user's manual is an

important reference for understanding circuit operation and completing hardware modification.

1.3 Features

The DK-TM4C123G development kit includes the following features:

• Tiva TM4C123GH6PGE Microcontroller

• Data logger demo application

• 9-axis (accelerometer + gyro + compass) motion sensor

• 2 Analog temperature sensors

– External TMP20 temperature sensor

– Internal microcontroller temperature sensor

• Controller Area Network (CAN) transceiver

• 8 screw terminals

– 4 analog inputs (0-20 V)

– Power

– Ground

– CAN-High

– CAN-Low

SPMU357B–August 2013–Revised March 2014 DK-TM4C123G Overview

Submit Documentation Feedback