Datasheet

(a)TopLayer (b)MiddleLayer1
(c)bottomLayer (d)MiddleLayer2
www.ti.com Components
• L
1
and L
2
are ferrite chips that can reduce interactions with the power supply at high frequencies. If not
desired, they can be replaced with 0 Ω resistors.
Figure 3. DEM-OPA-MSOP-1A Demonstration Fixture Layout
SBOU042A – November 2006 – Revised December 2008 DEM-OPA-MSOP-1A Demonstration Fixture 3
Submit Documentation Feedback