- Texas AIP Consumer Audio User's Guide

www.ti.com
3.2.5.1 Modifying a .csv File
Speaker Short Detection, L-Ch; Speaker Short Detection, R-Ch
The .csv file stores a sequence of register settings for the PCM3793A. To load a given register setting, it
should be written in hex code, as shown in Figure 3-25 ; use the left row for resistor addresses and the
right row for resistor values.
Figure 3-25. Opening and Modifying a .csv File
A sleep line can be inserted for implementing an interval (or wait) time until executing the next line of the
file. If the cell is blank, no wait time will be executed. Files can be imported and exported using the Open
script and Save register snapshot options.
SBAU127 – July 2007 Set-Up Guide 41
Submit Documentation Feedback