- Texas AIP Consumer Audio User's Guide

www.ti.com
3.2.3.5 Signal Processing I
15
10
5
0
5
10
15
-
-
-
Amplitude(dB)
10 100
1k
10k 100k
Frequency(Hz)
Source Options
Figure 3-13 illustrates the Signal Processing 1 function menu tab.
Figure 3-13. Signal Processing 1 Function Menu Tab
Source Options
Select the Source input to choose either the audio processing unit digital input (DAC) or digital output
(ADC). Internal audio processing can be applied to either the DAC or the ADC. This option also allows
users to choose an audio source.
Output Options
Select the Source drop-down menu to choose between a stereo or mono configuration.
• The output configuration can be selected by choosing stereo or mono.
Tone Control Options
Move the Bass, Mid, and Treble sliders to adjust the tone control gain. The tones are controlled by the
respective tone sliders. A three-band tone control characteristic plot is shown in Figure 3-14 .
Figure 3-14. Three-Band Tone Control (Bass, Mid, Treble)
SBAU127 – July 2007 Set-Up Guide 31
Submit Documentation Feedback