Datasheet

www.ti.com

DDC11xEVM-PDK Kit Operation

After the first driver is installed, disconnect and reconnect the USB cable to the DDCMB, or press the

RESET_USB button on the DDCMB. This step causes the second driver to be installed. You will then see

screens similar to those in Figure 14 through Figure 16.

Figure 14. Driver Selection for DDC USB Motherboard drv.2

Figure 15. Second Driver Not Signed Notification—Choose Continue Anyway

SLAU234A–October 2007–Revised July 2010 DDC11xEVM-PDK User's Guide