Datasheet

DCR01 Series
2
SBVS013C
SPECIFIED
PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT PACKAGE-LEAD DESIGNATOR RANGE MARKING NUMBER MEDIA, QUANTITY
DCR010503P DIP-18 NVE –40°C to +85°C DCR010503P DCR010503P Rails, 20
DCR010503U SO-28 DVB –40°C to +85°C DCR010503U DCR010503U/1K Tape and Reel, 1000
DCR010505P DIP-18 NVE –40°C to +85°C DCR010505P DCR010505P Rails, 20
DCR010505U SO-28 DVB –40°C to +85°C DCR010505U DCR010505U/1K Tape and Reel, 1000
DCR011203P DIP18 NVE –40°C to +85°C DCR011203P DCR011203P Rails, 20
DCR011203U SO-28 DVB –40°C to +85°C DCR011203U DCR011203U/1K Tape and Reel, 1000
DCR011205P DIP-18 NVE –40°C to +85°C DCR011205P DCR011205P Rails, 20
DCR011205U SO-28 DVB –40°C to +85°C DCR011205U DCR011205U/1K Tape and Reel, 1000
DCR012403P DIP-18 NVE –40°C to +85°C DCR012403P DCR012403P Rails, 20
DCR012403U SO-28 DVB –40°C to +85°C DCR012403U DCR012403U/1K Tape and Reel, 1000
DCR012405P DIP-18 NVE –40°C to +85°C DCR012405P DCR012405P Rails, 20
DCR012405U SO-28 DVB –40°C to +85°C DCR012405U DCR012405U/1K Tape and Reel, 1000
Input Voltage:
DCR0105 ............................................................................................ 7V
DCR0112 .......................................................................................... 15V
DCR0124 .......................................................................................... 29V
Storage Temperature ...................................................... –60°C to +125°C
Lead Temperature (soldering, 10s) ................................................. 270°C
ABSOLUTE MAXIMUM RATINGS
DCR01
Basic Model Number: 1W Product
Voltage Input:
5V In
Voltage Output:
5V Out
Package Code:
P = 18-Pin Plastic DIP, U = 28-Pin SO
ORDERING INFORMATION
05 05
(P)
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
PACKAGE/ORDERING INFORMATION