Datasheet

MECHANICAL DATA
MPDI055 – APRIL 2001
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
NVE (R-PDIP-T10/18) PLASTIC DUAL-IN-LINE
0.300 (7,63)
4202497/A 03/01
0.014 (0,36)
0.008 (0,20)
0.060 (1,52)
0.300 (7,62)
0.325 (8,26)
MIN 4 PL
Full Lead
0.115 (2,92)
0.150 (3,81)
0.115 (2,92)
0.195 (4,95)0.070 (1,78)
0.045 (1,14)
0.014 (0,36)
0.022 (0,56)
Area
1
18
9
10
0.280 (7,11)
0.240 (6,10)
0.920 (23,37)
0.880 (22,35)
Index
–C–
0.010 (0,25)
C
0.100 (2,54)
0.430 (10,92)
MAX
Seating
Plane
Plane
Base
0.005 (0,13)
0.015 (0,38)
MIN
0.210 (5,33)
MAX
0.000 (0,00)
M
D
E
F
F
D
E
D
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001-AC with the exception
of lead count.
D. Dimensions do not include mold flash or protrusions.
Mold flash or protrusions shall not exceed 0.010 (0,25).
E. Dimensions measured with the leads constrained to be
perpendicular to Datum C.
F. Dimensions are measured at the lead tips with the
leads unconstrained.
G. A visual index feature must be located within the
cross-hatched area.