Datasheet

!"# 
SBVS012E − DECEMBER 2000 − REVISED DECEMBER 2007
www.ti.com
2
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate
precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to
damage because very small parametric changes could cause the device not to meet its published specifications.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted
(1)
DCP01B SERIES UNIT
5−V models 7 V
Input voltage
15−V models 18 V
Input voltage
24−V models 29 V
Storage temperature −60 to +125 °C
Lead temperature (soldering, 10s) +270 °C
(1)
Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods
may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those specified is not implied.
SUPPLEMENTAL ORDERING INFORMATION
Basic Model Number: 1W Product
Voltage Input:
5V In
Voltage Output:
Dual Output:
Model Revision:
Package Code:
5V Out
P=DIP−14
P−U = SOP−14 (Gull−wing)
DCP01 05 05 (D) (B) ( )
ORDERING INFORMATION
(1)
PRODUCT PACKAGE-LEAD
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING NUMBER
(2)
TRANSPORT
MEDIA
SINGLE VOLTAGE
(3)
DCP010505
DIP-14 NVA −40°C to +100°C DCP010505BP DCP010505BP Rails
DCP010505
SOP-14
(4)
DUA −40°C to +100°C DCP010505BP−U DCP010505BP−U/700 Tape and Reel
DCP010512
DIP-14 NVA −40°C to +100°C DCP010512BP DCP010512BP Rails
DCP010512
SOP-14
(4)
DUA −40°C to +100°C DCP010512BP−U DCP010512BP−U/700 Tape and Reel
DCP010515
DIP-14 NVA −40°C to +100°C DCP010515BP DCP010515BP Rails
DCP010515
SOP-14
(4)
DUA −40°C to +100°C DCP010515BP−U DCP010515BP−U/700 Tape and Reel
DCP012405
DIP-14 NVA −40°C to +100°C DCP012405BP DCP012405BP Rails
DCP012405
SOP-14
(4)
DUA −40°C to +100°C DCP012405BP−U DCP012405BP−U/700 Tape and Reel
DUAL VOLTAGE
(3)
DCP010505
DIP-14 NVA −40°C to +100°C DCP010505DBP DCP010505DBP Rails
DCP010505
SOP-14
(4)
DUA −40°C to +100°C DCP010505DBP−U DCP010505DBP−U/700 Tape and Reel
DCP010507
DIP-14 NVA −40°C to +100°C DCP010507DBP DCP010507DBP Rails
DCP010507
SOP-14
(4)
DUA −40°C to +100°C DCP010507DBP−U DCP010507DBP−U/700 Tape and Reel
DCP010512
DIP-14 NVA −40°C to +100°C DCP010512DBP DCP010512DBP Rails
DCP010512
SOP-14
(4)
DUA −40°C to +100°C DCP010512DBP−U DCP010512DBP−U/700 Tape and Reel
DCP010515
DIP-14 NVA −40°C to +100°C DCP010515DBP DCP010515DBP Rails
DCP010515
SOP-14
(4)
DUA −40°C to +100°C DCP010515DBP−U DCP010515DBP−U/700 Tape and Reel
DCP011512
DIP-14 NVA −40°C to +100°C DCP011512DBP DCP011512DBP Rails
DCP011512
SOP-14
(4)
DUA −40°C to +100°C DCP011512DBP−U DCP011512DBP−U/700 Tape and Reel
DCP011515
DIP-14 NVA −40°C to +100°C DCP011515DBP DCP011515DBP Rails
DCP011515
SOP-14
(4)
DUA −40°C to +100°C DCP011515DBP−U DCP011515DBP−U/700 Tape and Reel
DCP012415
DIP-14 NVA −40°C to +100°C DCP012415DBP DCP012415DBP Rails
DCP012415
SOP-14
(4)
DUA −40°C to +100°C DCP012415DBP−U DCP012415DBP−U/700 Tape and Reel
(1)
All devices also available in tray quatities. For the most current package and ordering information, see the Package Option Addendum at the end of this data sheet,
or refer to our web site at www.ti.com.
(2)
Models with a (/) are available only in Tape and Reel in the quantities indicated (for example, /700 indicates 700 devices per reel). Ordering 700 pieces of
DCP010505BP−U/700 will get a single 700-piece Tape and Reel.
(3)
Single voltage versions have six active pins; dual voltage versions have seven active pins.
(4)
SOP package is gull-wing surface-mount.