Datasheet

Using the DAC8832EVM with DXP www.ti.com
The DXP software defaults to output a 1-kHz sine wave from the DAC. Other waveform options include
square, sawtooth, triangle, and dc output options, as described in the DXP User's Guide. The frequency
and amplitude of the output waveform are controlled by sliders on the DXP software interface. The DAC
update rate can also be modified, as shown in Figure 11.
Figure 11. DAC8832EVM: Frequency/Amplitude and Update Rate Adjustments
16
DAC8831/32 Evaluation Module SLAU202A–December 2006–Revised November 2009
Submit Documentation Feedback
Copyright © 2006–2009, Texas Instruments Incorporated