Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
DAC8802
SBAS351B – AUGUST 2005 – REVISED FEBRUARY 2007
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
PACKAGE/ORDERING INFORMATION
(1)
MINIMUM
RELATIVE DIFFERENTIAL SPECIFIED TRANSPORT
ACCURACY NONLINEARITY TEMPERATURE PACKAGE- PACKAGE ORDERING MEDIA,
PRODUCT (LSB) (LSB) RANGE LEAD DESIGNATOR NUMBER QUANTITY
DAC8802IPW Tubes, 90
DAC8802 ± 1 ± 1 –40°C to 85°C TSSOP-16 PW
DAC8802IPWR Tape and Reel, 2500
(1) For the most current specifications and package information, see the Package Option Addendum located at the end of this document, or
see the TI website at www.ti.com .
DAC8802 UNIT
V
DD
to GND –0.3 to 7 V
V
REF
X, R
FB
X to GND –18 to 18 V
Digital logic inputs to GND – 0.3 to + V
DD
+ 0.3 V
V(I
OUT
) to GND – 0.3 to V
DD
+ 0.3 V
A
GND
X to DGND –0.3 to +0.3 V
Input current to any pin except supplies ± 50 mA
Package power dissipation (T
J
max – T
A
)/ θ
JA
W
Thermal resistance, θ
JA
100 ° C/W
Maximum junction temperature (T
J
max) 150 ° C
Operating temperature range – 40 to 85 ° C
Storage temperature range – 65 to 150 ° C
HBM 4 kV
ESD
CDM 1 kV
(1) Stresses above those listed under absolute maximum ratings may cause permanent damage to the device. This is a stress rating only;
functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum conditions for extended periods may affect device reliability.
2
Submit Documentation Feedback