Datasheet

2.2 EVM Performance
PCB Design and Performance www.ti.com
Figure 8. Drill Drawing
The EVM performance test is performed using a high-density DAC bench test board, an Agilent 3458A
digital multimeter, and a personal computer (PC) running the LabVIEW™ software. The EVM board is
tested for all codes of 65535 and the device under test (DUT) is allowed to settle for 1 ms before the
meter is read. This process is repeated for all codes to generate the measurements for INL and DNL.
Figure 9 through Figure 15 shows the INL and DNL characteristic plots for each DAC channels of the
DAC8564 and the DAC8565, respectively.
8 DAC8564/65 Evaluation Module SLAU252 – June 2008
Submit Documentation Feedback