Datasheet

Bill of Materials

www.ti.com

Table 8. DAC8560EVM Parts List (continued)

Item Qty Value Designators Description Vendor Vendor Part No.

17 1 Difet Op-Amp U2 8-SOP(D) Precision High-Speed, Difet Op-Amp Texas OPA627AU

Instruments

18 2 10 × 2 × 0.1 J2 J4 20-PIN Terminal Strip Samtec TSM-110-01-S-DV-M

SMT

19 1 5 × 2 × 0.1 J6 10-PIN Terminal Strip Samtec TSM-105-01-T-DV

SMT

20 2 10 × 2 × 0.1 P2 P4 20-PIN Socket Strip

(1)

Samtec SSW-110-22-S-D-VS-P

SMT

21 1 5 × 2 × 0.1 P6 10-PIN Socket Strip

(1)

Samtec SSW-105-22-F-D-VS-K

SMT

22 5 1 × 1 × 0.061D TP1–TP5 Turret Terminal Pin Mill-Max 2348-2-00-01-00-00-07-0

23 2 3 × 1 × 0.7874 W2 W7 3-PIN Terminal Strip Samtec TMM-103-01-T-S

24 2 2 × 1 × 0.1 TH W3 W15 Modified 0.025" Square Post Header Samtec MTSW-102-08-T-S-295

25 5 3 x 1 × 0.1 TH W1 W4–W6 W8 Modified 0.025" Square Post Header Samtec MTSW-103-08-T-S-295

26 0 N/A N/A Schematic Diagram Texas 6484156

Instruments

27 1 N/A N/A Printed Wiring Board Texas 6484155

Instruments

28 0 N/A N/A Printed Circuit Assembly Texas 6484157

Instruments

29 0 N/A N/A 29 0 N/A N/A Kit Assembly Texas 6484158

Instruments

30 5 Do Not C6 R5 R7 R16 Do not install these components

(1)

Populate R25

31 1 2mm Shunt N/A Shorting Block for W2 Samtec 2SN-BK-G

32 6 0.100 Shorting N/A Shorting Blocks Samtec SNT-100-BK-G-H

Blocks

(1)

P2, P4, and P6 parts are not shown in the schematic diagram. All the P-designated parts are installed in the bottom side of the PC board

opposite the J-designated counterpart. Example, J2 is installed on the topside whereas P2 is installed in the bottom side opposite of J2.

Do NOT install the following: C6, R5, R7, R16, and R25.

DAC8560 Evaluation Module SLAU211A–March 2007–Revised November 2009

Submit Documentation Feedback