Datasheet

Using the DAC8560 EVM with DXP

www.ti.com

The DXP software defaults to output a 1-kHz sine wave from the DAC. Other waveform options include

square, sawtooth, triangle, and dc output options, as described in the DXP User's Guide. The frequency

and amplitude of the output waveform are controlled by sliders on the DXP software interface. The DAC

update rate can also be modified, as shown in Figure 13.

Figure 13. DAC8560EVM: Frequency/Amplitude and Update Rate Adjustments

DAC8560 Evaluation Module SLAU211A–March 2007–Revised November 2009

Submit Documentation Feedback