Datasheet

PCB Layout
2-6
Figure 2–9. Drill Layer (Mechanical Specifications)
Notes: 1) PWB to be fabricated to meet or exceed IPC-6012, Class 2 standards and workmanship shall conform to IPC-A-600,
Class 2—current revisions.
2) Board material and construction to be UL approved and marked on the finished board.
3) Laminate material: copper-clad FR-4
4) Copper weight: 1 oz finished—all layers
5) Finished thickness: 0.062 ±0.010 inch
6) Minimum plating thickness in through holes: 0.001 inch
7) SMOBC/HASL
8) LPI soldermask both sides using appropriate layer artwork: color = purple
9) LPI silkscreen as required: color = white
10)Vendor information to be incorporated on back side whenever possible.
11)Minimum copper conductor width is 6 mils
Minimum conductor spacing is 6 mils
Minimum annular ring is 5 mils