Datasheet

www.ti.com

Using the SC70 DAC EVM With DXP

Figure 2. Loading a SC70 DAC EVM Configuration

The DXP software defaults to output a 1-kHz sine wave from the DAC; other waveform options include

Square, Saw tooth, Triangle, and DC output options as described in the DXP User's Guide. The frequency

and amplitude of the output waveform is controlled by sliders on the DXP interface. The DAC update rate

can also be modified as shown in Figure 3.

SLAU299–November 2009 SC70 DAC EVM

Submit Documentation Feedback