Datasheet

EVM Performance
2-7
PCB Design and Performance
2.2 EVM Performance
The EVM performance test is performed using a high density DAC bench test
board, an Agilent 3458A digital multimeter, and a PC running the LABVIEW
software. The EVM board is tested for all codes of the device under test (DUT)
and is allowed to settle for 1 ms before the meter is read. This process is
repeated for all codes to generate the measurements for INL and DNL results.
The parameters and results of the DAC7654 EVM characterization test are
shown in Figure 2−8 to Figure 2−12.
Figure 2−8. DAC7654 EVM Test Parameters and Results in Bipolar Configuration