Datasheet

DAC7642, DAC7643
2
SBAS233
www.ti.com
SPECIFIED
PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT MONOTONICITY PACKAGE-LEAD DESIGNATOR
(1)
RANGE MARKING NUMBER MEDIA, QUANTITY
DAC7642VF 14 Bits LQFP-32 VF –40°C to +85°C DAC7642 DAC7642VFT Tape and Reel, 250
" """""DAC7642VFR Tape and Reel, 1000
DAC7642VFB
15 Bits LQFP-32 VF –40°C to +85°C DAC7642B DAC7642VFBT Tape and Reel, 250
" """""DAC7642VFBR Tape and Reel, 1000
DAC7643VF 14 Bits LQFP-32 VF –40°C to +85°C DAC7643 DAC7643VFT Tape and Reel, 250
" """""DAC7643VFR Tape and Reel, 1000
DAC7643VFB 15 Bits LQFP-32 VF –40°C to +85°C DAC7643B DAC7643VFBT Tape and Reel, 250
" """""DAC7643VFBR Tape and Reel, 1000
NOTE: (1) For the most current specifications and package information, refer to our web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS
(1)
V
CC
to V
SS
............................................................................. –0.3V to 11V
V
CC
to GND .......................................................................... –0.3V to 5.5V
V
REF
L to V
SS
............................................................. –0.3V to (V
CC
– V
SS
)
V
CC
to V
REF
H ............................................................ –0.3V to (V
CC
– V
SS
)
V
REF
H to V
REF
L ......................................................... –0.3V to (V
CC
– V
SS
)
Digital Input Voltage to GND ................................... –0.3V to V
CC
+ 0.3V
Digital Output Voltage to GND ................................. –0.3V to V
CC
+ 0.3V
Maximum Junction Temperature ................................................... +150°C
Operating Temperature Range ........................................–40°C to +85°C
Storage Temperature Range ......................................... –65°C to +125°C
Lead Temperature (soldering, 10s) ............................................... +300°C
NOTE: (1) Stresses above those listed under “Absolute Maximum Ratings”
may cause permanent damage to the device. Exposure to absolute maximum
conditions for extended periods may affect device reliability.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance
degradation to complete device failure. Precision integrated
circuits may be more susceptible to damage because very
small parametric changes could cause the device not to meet
its published specifications.
PACKAGE/ORDERING INFORMATION