Datasheet

www.ti.com
1 4
1 4
1 4
1 4
7.7 Schematics
EVM Operation
Table 8. Jumper Setting Function (continued)
Reference Jumper Setting Function
DAC V
OUT
is routed to the inverting input of U2.
DAC V
OUT
is routed to the noninverting input of U2.
J5
The noninverting input of U2 is tied to AGND.
DAC V
OUT
is routed to the inverting input of U2 and the noninverting input of U2 is tied to AGND.
Legend: Indicates the corresponding pins that are shorted or closed.
The schematic is located on the following page.
DAC7631EVM 16 SLAU148 – January 2005