Datasheet

Bill of Material and EVM Schematic

www.ti.com

6 Bill of Material and EVM Schematic

Table 4 contains a complete bill of materials for the DACxx68EVM. The schematic diagram also is

provided for reference.

6.1 Bill of Materials

Table 4. Bill of Materials

Designators Description Manufacturer Mfg. Part Number

C1, C11 CAP CER 10UF 6.3V X5R 20% 0603 TDK C1608X5R0J106M

C2 CAP CER 10UF 16V X5R 0805 Taiyo Yuden EMK212BJ106KG-T

C3 CAP CER 22UF 10V X5R 0805 Taiyo Yuden LMK212BJ226MG-T

C4, C5, C6 CAP CER .10UF 50V X7R 10% 0603 TDK C1608X7R1H104K

C7, C10 NI

C8 CAP CER 1.0UF 16V X7R 10% 0603 TDK C1608X7R1C105K

C9 CAP CER 2.2UF 10V X5R 0603 TDK C1608X5R1A225K

J1A, J2A (Top Side) 10 Pin, Dual Row, SM Header (20 Pos.) Samtec TSM-110-01-T-DV-P

J1B, J2B (Bottom Side) 10 Pin, Dual Row, SM Header (20 Pos.) Samtec SSW-110-22-F-D-VS-K

J3A (Top Side) 5 Pin, Dual Row, SM Header (10 Pos.) Samtec TSM-105-01-T-DV-P

J3B (Bottom Side) 5 Pin, Dual Row, SM Header (10 Pos.) Samtec SSW-105-22-F-D-VS-K

JP1, JP2 Header Strip ( 2 x 1) Samtec TSW-102-07-L-S

JP3 - JP6 Header Strip (3 x 1) Samtec TSW-103-07-L-S

R1, R2, R10 RES 10.0K OHM 1/10W 1% 0603 SMD Yageo RC0603FR-0710KL

R3, R6 RES 0 OHM, 1/16W 5% 0603 Chip Resistor Yageo RC0603JR-070RL

R4 RES 1.5 OHM 1/10W 5% 0603 SMD Yageo RC0603JR-071R5L

R5 RES 2.00K OHM 1/10W 1% 0603 SMD Yageo RC0603FR-072KL

R7, R8, R9 RES 33.0 OHM 1/10W 1% 0603 SMD Yageo RC0603FR-0733RL

TP1, TP3, TP5 TEST POINT PC MINI 0.040"D RED Keystone 5000

TP2, TP4 TEST POINT PC MINI 0.040"D BLACK Keystone 5001

(1)

Device Under Test TI DAC8568/8168/7568ICPW

U2 IC PREC V-REF 2.5V LN 8-SOIC TI REF5025AID

U3 IC OPAMP GP R-R 90KHZ SOT23-5 TI OPA379AIDBVT

(1)

The device installed at location U1 is dependent on the EVM ordered. This device is soldered to the board for best performance.

U1 may be replaced with any device listed in the EVM Compatible Device Data Sheets table found at the beginning of this

document.

DACxx68EVM SLAU301–November 2009

Submit Documentation Feedback