Datasheet

DAC7513
3
SBAS157A
www.ti.com
MSOP-8 SOT23-8 NAME DESCRIPTION
14V
DD
Power Supply Input, +2.7V to +5.5V
23V
REF
Reference Voltage Input
32V
FB
Feedback connection for the output amplifier.
41V
OUT
Analog output voltage from DAC. The output amplifier has rail-to-rail operation.
5 8 SYNC Level triggered control input (active LOW), this is the frame sychronization signal for the input data. When SYNC
goes LOW, it enables the input shift register and data is transferred in on the falling edges of the following clocks.
The DAC is updated following the 16th clock cycle unless SYNC is taken HIGH before this edge in which case
the rising edge of SYNC acts as an interrupt and the write sequence is ignored by the DAC7513.
6 7 SCLK Serial Clock Input. Data can be transferred at rates up to 30MHz.
76D
IN
Serial Data Input. Data is clocked into the 16-bit input shift register on the falling edge of the serial clock input.
8 5 GND Ground reference point for all circuitry on the part.
PIN DESCRIPTIONS
MARKING ARTWORK
Top View SOT23-8
MSOP-8
Lot
Trace Code
Pin 1
D13E
Model Code
(4 Characters Max.)
YMLL
GRS00035 Option 1
Pin 1
Identifier
Pin 1
D13N
Bottom View
YMLL
Lot Trace Code
GRS00035 Option 1