Datasheet

www.ti.com

DAC5668/88/89 EVM Software

Table 6. Software Main Settings

SETTING FUNCTION

EVM Home EVM and DAC serial information. EVM communication status

DAC Registers DAC register settings (See the DAC data sheet for detailed information on each register)

CDCM7005 Registers CDCM7005 register settings (See the CDCM7005 data sheet for detailed information on each register)

DAC Diagram DAC data path under current register settings

Help Displays a short description of each DAC setting

5.1.1 General Controls

Reset USB Port:

Begins a new USB session. Click this button if a status error message occurs.

Readback Enabled/Disabled:

Enable or disables the DAC register reads. When Readback is disabled, the software enters simulation

mode. If communicating with the DAC is a problem, the software enters into simulation mode

automatically.

Save Settings:

Saves the DAC and CDCM7005 register configurations to a text file for future use.

Load Settings:

Loads a DAC and CDCM7005 register configuration from a text file and updates the GUI.

SLAU241A–June 2008–Revised March 2010 DAC5668/88/89EVM

Submit Documentation Feedback