Datasheet

DAC5682Z
www.ti.com SLLS853E –AUGUST 2007–REVISED AUGUST 2012
Changes from Revision C (June 2009) to Revision D Page
• Changed CONFIG5 Bit4 from "FIFO_ sync_dis" to "Reserved" in Register Map .............................................................. 20
• Changed CONFIG6 Bit 7 from "Hold_ sync_dis" to "Reserved" in Register Map .............................................................. 20
• Deleted - unless-----CONFIG5 register. in FIFO_offset(2:0): on page 21 .......................................................................... 21
• Changed Bit 4 in CONFIG5 table from FIFO_sync_dis to Reserved ................................................................................. 24
• Changed "FIFO_sync_sis: Disables the FIFO offset sync........ CONFIG1 register" to "Reserved (Bit 4): Set to 0 for
proper operation." ............................................................................................................................................................... 24
• Changed Hold_sync _dis to Reserved ............................................................................................................................... 24
• Changed from Hold_sync_dis: When set, disables the sync to the FIFO .....control bit in CONFIG5." to " Reserved
(Bit 7): Set to 0 for proper operation." ................................................................................................................................. 24
• Changed "defined by individual control bits in registers CONFIG1, CONFIG5 and CONFIG6." to "defined by
individual control bits in registers CONFIG1 and CONFIG5." ............................................................................................ 40
• Changed wording in second sentence of RECOMMENED....PROCEDURE section from CONFIG5 clkdiv_sync_dis
and FIFO_sync_dis bits as well to CONFIG5 clkdiv_sync_dis as well ........................................................................... 41
• Deleted list items in first and second ordered list in RECOMMENED....PROCEDURE section ........................................ 41
Changes from Revision D (March 2011) to Revision E Page
• Changed the Revision to E, August 2012 ............................................................................................................................. 1
• Changed the graphic entity of Figure 37 for clarification. ................................................................................................... 37
• Changed the first paragraph of ANALOG CURRENT OUTPUTS section for clarification. ................................................ 45
Copyright © 2007–2012, Texas Instruments Incorporated Submit Documentation Feedback 53
Product Folder Links: DAC5682Z