Datasheet

Parts List
3-6
3.2 Parts List
Table 3−1 lists the parts used in constructing the EVM.
Table 3−1. DAC5672/62/52 EVM Parts List
Value Qty Part Number Vendor Ref Des Not Installed
Capacitors
47 µF, tantalum, 10%, 10 V 2 10TPA47M Sanyo C16, C17
10 µF, 10 V, 10% capacitor 4 GRM42X5R106K10 Murata C6, C9, C10,
C11
1 µF, 16 V, 10% capacitor 2 ECJ−3YB1C105K Panasonic C12, C13
0.01 µF, 50 V,5% capacitor 2 ECJ−2VB1H103K Panasonic C14, C15
0.1 µF, 16 V, 10% capacitor 2 ECJ−1VB1C104K Panasonic C1, C19 C7, C8, C18,
C20, C21
0.1 µf, 16 V, 80% capacitor 3 ECJ−0EF1C104Z Panasonic C2, C3, C5
Resistors
0-Ω resistor, 1/16 W, 1% 6 ERJ−3GEY0R00V Panasonic R13, R17,
R21−R23, R27
R9-R12, R15,
R18, R24−R26,
R28, R29
100-Ω resistor, 1/16W, 0.1% 2 ERA−3YEB100V Panasonic R7, R8
49.9-Ω resistor, 1/16 W, 1% 4 ERJ−3EKF49R9V Panasonic R3, R4, R5, R6
2-kΩ resistor, 1/16 w, 1% 2 ERJ−3EKF1001V Panasonic R1, R2
49.9-Ω resistor, 1/16 W, 1% 1 ERJ−2RFK49R9X Panasonic R20 R14, R16, R19
51−Ω resistor pack 0 CTS RP5−RP8
0-Ω R−Pack, EXB−38V
SERIE
8 EXB−38V000JV Panasonic RP1−RP4,
RP9-RP12
Ferrite Beads, Connectors, Jumpers, Jacks, IC’s, etc.
Ferrite bead 2 EXC−ML32A680U Digi-Key FB1, FB2
SMA connectors 3 713−4339
(901−144−8RFX)
Allied J1, J2, J3 J4, J5, J6, J7, J8
Red test point 5 5000k Keystone TP1−TP5
Black test point 2 5001k Keystone TP6, TP7
2POS_header 4 TSW−150-07−L−S Samtec W1 W2 W3 W9
15-pin header 1 TSW−110-07−L−T Samtec J11
34-pin header 2 TSW−117−07−L−D Samtec J9, J10
Red banana jacks 2 ST−351A Allied J12, J13
Black banana jacks 2 ST−351B Allied J14, J15
DAC5672/62/52 1 DAC5672/62/52IPFB Texas
Instruments
U1
Transformer 2 T1−1T−KK81 Mini-Circuits T1, T2
Install W1, W2; On J11 install jumpers between pins 2 and 3, 4 and 5, and 10 and 11.