Datasheet

www.ti.com

DAC5574 Registers

DAC5574 as a Slave Receiver - Standard and Fast Mode

SLAVE ADDRESS R/W A Ctrl-Byte A MS-Byte A LS-Byte A/A P

0 (write)

Data Transferred

(n* Words + Acknowledge)

Word = 16 Bit

From Master to DAC5574

From DAC5574 to Master

A = Acknowledge (SDA LOW)

A = Not Acknowledge (SDA HIGH)

S = START Condition

Sr = Repeated START Condition

P = STOP Condition

DAC5574 I

C-SLAVE ADDRESS:

1 0 0 1 1 A1 A0 R/W

MSB LSB

Factory Preset

A0 = I

C Address Pin

A1 = I

C Address Pin

0 = Write to DAC5574

1 = Read from DAC5574

DAC5574

SLAS407 – DECEMBER 2003

Table 3. DAC5574 Architecture Register Descriptions

CTRL[7:0] Stores 8-bit wide control byte sent by the master

MSB[7:0] Stores the 8 most significant bits of unsigned binary data sent by the master. Can also store 2-bit power-down data.

TRA[9:0], TRB[9:0], 10-bit temporary storage registers assigned to each channel. Two MSBs store power-down information, 8 LSBs

TRC[9:0], TRD[9:0] store data.

DRA[9:0], DRB[9:0], 10-bit DAC registers for each channel. Two MSBs store power-down information, 8 LSBs store DAC data. An

DRC[9:0], DRD[9:0] update of this register means a DAC update with data or power down.

Figure 33 shows the standard and fast mode master transmitter addressing a DAC5574 Slave Receiver with a

7-bit address.

Figure 33. Standard and Fast Mode: Slave Receiver