Datasheet

PC
+5V
+6V
USB
USB
J5
J12
DAC348X
J14
J18
TSW1400
J4
J13
USB Mini-B
Cable
USB Mini-B
Cable
IF
Spectrum
Analyzer
Signal
Generator
(CLK Source)
J9
www.ti.com
Basic Test Procedure with TSW1400
3 Basic Test Procedure with TSW1400
This section outlines the basic test procedure for testing the EVM with the TSW1400.
3.1 TSW1400 Overview
The TSW1400 is a high speed data capture and pattern generator board. When functioning as a pattern
generator, it has a maximum LVDS bus rate of 1.5 GSPS, and this allows evaluation of the DAC348x with
maximum 750 MSPS of input data rate per channel.
See the TSW1400 user’s guide (SLWU079) for more detailed explanation of the TSW1400 setup and
operation. This document assumes that the High Speed Data Converter Pro software (SLWC107) is
installed and functioning properly.
3.2 Test Block Diagram for TSW1400
The test set-up for general testing of the DAC348x with the TSW1400 pattern generation card is shown in
Figure 8.
Figure 8. Test Set-up Block Diagram for TSW1400
11
SLAU432February 2012 DAC348x EVM
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated