Datasheet

DAC161P997

SNAS515E –JULY 2011–REVISED OCTOBER 2013

www.ti.com

ERR_LOW

Address=0x04; Default=0x24

Bit Field Name Description

8-bit value. If ERRLVL = LOW, the DAC will use the value stored in ERR_LOW register to set

the output current sourced from OUT pin when reporting an error condition. The ERR_LOW

7:0 value is used as the upper byte of the DACCODE, while the lower byte is forced to 0x00. At

power up the ERR_LOW defaults to a value which forces IERRL output current. See

ELECTRICAL CHARACTERISTICS.

ERR_HIGH

Address=0x05; Default=0xE8

Bit Field Name Description

If ERRLVL = HIGH, the DAC will use the value stored in ERR_HIGH register to set the output

current sourced from OUT pin when reporting an error condition. The ERR_HIGH value is used

7:0 as the upper byte of the DACCODE, while the lower byte is forced to 0x00. At power-up the

ERR_HIGH defaults to a value which forces IERRH output current. See ELECTRICAL

CHARACTERISTICS.

Product Folder Links: DAC161P997