Datasheet

DAC108S085
www.ti.com SNAS423B –AUGUST 2007–REVISED MARCH 2013
Package Thermal Resistances
(1)(2)
Package θ
JA
16-Lead WQFN 38°C/W
16-Lead TSSOP 130°C/W
(1) Soldering process must comply with Texas Instruments' Reflow Temperature Profile specifications. Refer to
http://www.ti.com/packaging.
(2) Reflow temperature profiles are different for lead-free packages.
Electrical Characteristics
The following specifications apply for V
A
= +2.7V to +5.5V, V
REF1
= V
REF2
= V
A
, C
L
= 200 pF to GND, f
SCLK
= 30 MHz, input
code range 12 to 1011. Boldface limits apply for T
MIN
≤ T
A
≤ T
MAX
and all other limits are at T
A
= 25°C, unless otherwise
specified.
Units
Symbol Parameter Conditions Typical Limits
(1)
(Limits)
STATIC PERFORMANCE
Resolution 10 Bits (min)
Monotonicity 10 Bits (min)
INL Integral Non-Linearity ±0.5 ±2 LSB (max)
+0.08 +0.35 LSB (max)
DNL Differential Non-Linearity
−0.04 −0.2 LSB (min)
ZE Zero Code Error I
OUT
= 0 +5 +15 mV (max)
FSE Full-Scale Error I
OUT
= 0 −0.1 −0.75 % FSR (max)
GE Gain Error −0.2 −1.0 % FSR (max)
ZCED Zero Code Error Drift −20 µV/°C
TC GE Gain Error Tempco −1.0 ppm/°C
OUTPUT CHARACTERISTICS
0 V (min)
Output Voltage Range
V
REF1,2
V (max)
High-Impedance Output Leakage
I
OZ
±1 µA (max)
Current
(2)
V
A
= 3V, I
OUT
= 200 µA 10 mV
V
A
= 3V, I
OUT
= 1 mA 45 mV
ZCO Zero Code Output
V
A
= 5V, I
OUT
= 200 µA 8 mV
V
A
= 5V, I
OUT
= 1 mA 34 mV
V
A
= 3V, I
OUT
= 200 µA 2.984 V
V
A
= 3V, I
OUT
= 1 mA 2.933 V
FSO Full Scale Output
V
A
= 5V, I
OUT
= 200 µA 4.987 V
V
A
= 5V, I
OUT
= 1 mA 4.955 V
V
A
= 3V, V
OUT
= 0V, Input Code = 3FFh −50 mA
Output Short Circuit Current
I
OS
(source)
(3)
V
A
= 5V, V
OUT
= 0V, Input Code = 3FFh −60 mA
V
A
= 3V, V
OUT
= 3V, Input Code = 000h 50 mA
Output Short Circuit Current
I
OS
(sink)
(3)
V
A
= 5V, V
OUT
= 5V, Input Code = 000h 70 mA
T
A
= 105°C 10 mA (max)
Continuous Output Current per
I
O
channel
(2)
T
A
= 125°C 6.5 mA (max)
R
L
= ∞ 1500 pF
C
L
Maximum Load Capacitance
R
L
= 2kΩ 1500 pF
Z
OUT
DC Output Impedance 8 Ω
(1) Test limits are specified to AOQL (Average Outgoing Quality Level).
(2) This parameter is specified by design and/or characterization and is not tested in production.
(3) This parameter does not represent a condition which the DAC can sustain continuously. See the continuous output current specification
for the maximum DAC output current per channel.
Copyright © 2007–2013, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: DAC108S085