Datasheet
1 2 3 4 5 6
TIME (1 ns/Div)
0
4
3
2Q0
1Q0
5
6
7
8
V
EE
V
IN-
V
IN+
V
CC
Q1
Q1
CLC007
www.ti.com
SNLS016E –JULY 1998–REVISED APRIL 2013
CLC007 Serial Digital Cable Driver with Dual Complementary Outputs
Check for Samples: CLC007
1
FEATURES
DESCRIPTION
The Texas Instruments Comlinear CLC007 is a
2
• No External Pull-Down Resistors
monolithic, high-speed cable driver designed for the
• Differential Input and Output
SMPTE 259M serial digital video data transmission
• Low Power Dissipation
standard. The CLC007 drives 75Ω transmission lines
(Belden 8281 or equivalent) at data rates up to 400
• Single +5V or −5.2V Supply
Mbps. Controlled output rise and fall times (750 ps
• Replaces GS9007 in Most Applications
typical) minimize transition-induced jitter. The output
voltage swing, typically 1.65V, set by an accurate,
APPLICATIONS
low-drift internal bandgap reference, delivers an 800
mV swing to back-matched and terminated 75Ω
• Digital Routers and Distribution Amplifiers
cable.
• Coaxial Cable Driver for Digital Transmission
Line The CLC007’s class AB output stage consumes less
power than other designs, 195 mW with all outputs
• Twisted Pair Driver
terminated, and requires no external bias resistors.
• Digital Distribution Amplifiers
The differential inputs accept a wide range of digital
• SMPTE, Sonet/SDH, and ATM Compatible
signals from 200 mV
P-P
to ECL levels within the
specified common-mode limits. All this make the
Driver
CLC007 an excellent general purpose high speed
• Buffer Applications
driver for digital applications.
KEY SPECIFICATION
The CLC007 is powered from a single +5V or −5.2V
supply and comes in an 8-pin SOIC package.
• 650 ps Rise and Fall Times
• Data Rates to 400 Mbps
• 2 Sets of Complimentary Outputs
• 200 mV Differential Input
• Low Residual Jitter (25 ps
pp
)
270 Mbps Eye Pattern
Connection Diagram
Figure 2. 8-Pin SOIC
See D Package
Figure 1.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 1998–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.