Datasheet

Device Operation (Continued)

A typical LVDS input connection is shown in Figure 9. The

media is driven differentially by an LVDS driver. The line is

terminated with a termination resistor equal to the imped-

ance of the line being driven. The actual resistor value is

media specific, but typically is between 100 and 120Ω. This

resistor should be located close to the CLC001 inputs pins to

minimize the resulting stub length between the resistor and

device pads. The CLC001 supports

100mV thresholds

across the entire LVDS common mode range of 0.1V to 2.3V

for a 200mV differential signal.

10132909

FIGURE 9. LVDS, DC-coupled

CLC001