Datasheet

Features
www.ti.com
7 CDCM6208V1/CDCM6208V2 EVM Device Pins and Bypassing ................................................... 15
8 CDCM6208V1/CDCM6208V2 EVM Reference Inputs ............................................................... 16
9 CDCM6208V1/CDCM6208V2 EVM Outputs 0 to 3................................................................... 17
10 CDCM6208V1/CDCM6208V2 EVM Outputs 4 to 7................................................................... 18
11 CDCM6208V1/CDCM6208V2 EVM Power Supplies ................................................................. 19
12 Onboard MSP430G2001 ................................................................................................ 20
List of Tables
1 Input Selection Jumper Settings .......................................................................................... 9
2 Mode Selection Jumper Settings ......................................................................................... 9
3 STATUS1 Functional Description ....................................................................................... 10
4 Device Control Pin Functions ............................................................................................ 10
1 Features
Easy-to-use evaluation module generating low-phase noise clocks up to 800 MHz
Easy device programming via host-powered USB port or control pins
Rapid configuration with provided EVM Control Software
Powered from the USB port, or by an external 3.3-, 2.5-, or 1.8-V power supply
Single-ended or differential input; external crystal for use with on-chip oscillator
Words shown in bold italics in this document show the same name and label on the EVM board itself.
2
CDCM6208 Evaluation Board SCAU049AMay 2012Revised January 2013
Submit Documentation Feedback
Copyright © 2012–2013, Texas Instruments Incorporated