Datasheet

Noteprogramfilelocationasthe
USBcontrollerdriverisinthe
samelocation!
Installing the GUI Interface and USB Driver www.ti.com
Connect the USB cable to the EVM. If The Windows™ operating system asks for an appropriate driver, do
not use the automatic search option. Select a manual installation, and when prompted for the driver
location, browse to the CDCE72010 GUI file folder that was used during instillation. If the Windows
operating system does not ask for a driver, no action is required.
After the USB driver installation, the GUI software must connect properly and be ready for use. A green
light in the USB Status and SPI Bus Status boxes indicates good USB connection, and a red light
indicates faulty USB connection or faulty SPI bus.
1.5-GHz Low-Phase Noise Clock Evaluation Board4 SLAU250 – May 2008
Submit Documentation Feedback