Datasheet

CD74FCT273
BiCMOS OCTAL D-TYPE FLIP-FLOP
WITH RESET
SCBS737A – JULY 2000 – REVISED JULY 2000
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
†
DC supply voltage range, V
CC
–0.5 V to 6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DC input diode current, I
IK
(V
I
< –0.5 V) –20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DC output diode current, I
OK
(V
O
< –0.5 V) –50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DC output sink current per output pin, I
OL
70 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DC output source current per output pin, I
OH
–30 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous current through V
CC
, I
CC
140 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous current through GND 400 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θ
JA
(see Note 1): E package 69°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M package 58°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
stg
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: The package thermal impedance is calculated in accordance with JESD 51.
recommended operating conditions (see Note 2)
MIN MAX UNIT
V
CC
Supply voltage 4.75 5.25 V
V
IH
High-level input voltage 2 V
V
IL
Low-level input voltage 0.8 V
V
I
Input voltage 0 V
CC
V
V
O
Output voltage 0 V
CC
V
I
OH
High-level output current –15 mA
I
OL
Low-level output current 48 mA
∆t/∆v Input transition rise or fall rate 0 10 ns/V
T
A
Operating free-air temperature 0 70 °C
NOTE 2: All unused inputs of the device must be held at V
CC
or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs , literature number SCBA004.
electrical characteristics over recommended operating temperature range (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
V
CC
T
A
= 25°C
MIN
MAX
UNIT
PARAMETER
TEST
CONDITIONS
V
CC
MIN MAX
MIN
MAX
UNIT
V
IK
I
I
= –18 mA 4.75 V –1.2 –1.2 V
V
OH
I
OH
= –15 mA 4.75 V 2.4 2.4 V
V
OL
I
OL
= 48 mA 4.75 V 0.55 0.55 V
I
I
V
I
= V
CC
or GND 5.25 V ±0.1 ±1 A
I
OZ
V
O
= V
CC
or GND 5.25 V ±0.5 ±10 A
I
OS
‡
V
I
= V
CC
or GND, V
O
= 0 5.25 V –60 –60 mA
I
CC
V
I
= V
CC
or GND, I
O
= 0 5.25 V 8 80 A
∆I
CC
§
One input at 3.4 V,
Other inputs at V
CC
or GND
5.25 V 1.6 1.6 mA
C
i
V
I
= V
CC
or GND 10 pF
‡
Not more than one output should be tested at a time, and the duration of the test should not exceed 100 ms.
§
This is the increase in supply current for each input at one of the specified TTL voltage levels rather than 0 V or V
CC
.