Datasheet

7-1395
Specifications CD40175BMS
Output Current (Source) IOH15 VDD =15V, VOUT = 13.5V 1, 2 +125
o
C - -2.4 mA
-55
o
C - -4.2 mA
Input Voltage Low VIL VDD = 10V, VOH > 9V, VOL < 1V 1, 2 +25
o
C, +125
o
C,
-55
o
C
-3V
Input Voltage High VIH VDD = 10V, VOH > 9V, VOL < 1V 1, 2 +25
o
C, +125
o
C,
-55
o
C
7-V
Propagation Delay
Clock to Q Output
TPHL1
TPLH1
VDD = 10V 1, 2, 3 +25
o
C - 160 ns
VDD = 15V 1, 2, 3 +25
o
C - 120 ns
Propagation Delay
Clear to Q Output
TPHL2 VDD = 10V 1, 2, 3 +25
o
C - 200 ns
VDD = 15V 1, 2, 3 +25
o
C - 150 ns
Transition Time TTHL
TTLH
VDD = 10V 1, 2, 3 +25
o
C - 100 ns
VDD = 15V 1, 2, 3 +25
o
C - 80 ns
Minimum Data Setup
Time
TS VDD = 5V 1, 2, 3 +25
o
C - 120 ns
VDD = 10V 1, 2, 3 +25
o
C - 50 ns
VDD = 15V 1, 2, 3 +25
o
C - 40 ns
Minimum Data Hold Time TH VDD = 5V 1, 2, 3 +25
o
C - 80 ns
VDD = 10V 1, 2, 3 +25
o
C - 40 ns
VDD = 15V 1, 2, 3 +25
o
C - 30 ns
Minimum Clear Pulse
Width
TW VDD = 5V 1, 2, 3 +25
o
C - 200 ns
VDD = 10V 1, 2, 3 +25
o
C - 80 ns
VDD = 15V 1, 2, 3 +25
o
C - 60 ns
Maximum Clock Rise or
Fall Time
TRCL
TFCL
VDD = 5V 1, 2, 3, 4 +25
o
C15-µs
VDD = 10V 1, 2, 3, 4 +25
o
C15-µs
VDD = 15V 1, 2, 3, 4 +25
o
C15-µs
Minimum Clear Removal
Time (Clear to be High
before Positive Transition
of Clock)
TREM VDD = 5V 1, 2, 3 +25
o
C - 250 ns
VDD = 10V 1, 2, 3 +25
o
C - 100 ns
VDD = 15V 1, 2, 3 +25
o
C - 80 ns
Minimum Clock Pulse
Width
TW VDD = 5V 1, 2, 3 +25
o
C - 250 ns
VDD = 10V 1, 2, 3 +25
o
C - 100 ns
VDD = 15V 1, 2, 3 +25
o
C - 75 ns
Input Capacitance CIN Any Input 1, 2 +25
o
C - 7.5 pF
NOTES:
1. All voltages referenced to device GND.
2. The parameters listed on Table 3 are controlled via design or process and are not directly tested. These parameters are characterized
on initial design release and upon design changes which would affect these characteristics.
3. CL = 50pF, RL = 200K, Input TR, TF < 20ns.
4. If more than one unit is cascaded, TRCL should be made less than or equal to the sumof the transition time and the fixed propagation
delay of the output of the driving stage for the estimated capacitive load.
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS
(Continued)
PARAMETER SYMBOL CONDITIONS NOTES TEMPERATURE
LIMITS
UNITSMIN MAX